Electrifly Pluma 3D

Description

With the Pluma, the only thing between you and a full day of aerobatics is a few minutes of easy assembly on the bench. And once you're in the air, you'll discover all of the advantages of exclusive Pro-Formance™ foam construction. Ultra-light and wafer-thin, its power-to-weight ratio puts the entire aerobatic envelope at your command, from stately loops and rolls to hair-raising waterfalls and knife-edge loops.

• Assembles in about an hour – and excels indoors and out!
• Largely prebuilt, with keyed and laser-cut parts that speed the completion of remaining steps.
• Performs everything from traditional air show aerobatics to all-out 3D stunts!

You can speed the Pluma from box to flight-ready in only an hour! The trim scheme is imprinted and the fuselage is already assembled. All other parts (including the servo pockets) are laser-cut, interlocking and self-aligning.

• Ailerons and elevators are beveled and prehinged with ultra-light 3M® Blenderm® tape – just like aerobats built for 3D competition.
• The box fuselage provides the strength for aerobatics and ample room for a wide range of batteries. An easy-access hatch lets you switch packs in a few seconds.
• The Pluma can perform brilliantly with the smallest of RimFire™ outrunner motors. But with its generous wing area, you have the lift (and flexibility) to performance-tune with any number of motor-battery combinations.
• Attractive graphics and impressive, "full-fuse" appearance make the Pluma a standout any way you look at it!

Specifications:

• Stock Number: GPMA1130
• Wingspan: 32.5 in (830 mm)
• Wing Area: 518 in² (33.4 dm²)
• Weight Range: 8.4-9.5 oz (240-270 g)
• Wing Loading: 2.3-2.6 oz/ft² (7.2-8.1 g/dm²)
• Length: 38 in (955 mm)
• Requires: 4-channel radio w/3 micro servos, outrunner brushless motor, 8A brushless ESC (minimum) & 11.1V 300mAh LiPo battery.

More Pictures