Electrifly Yak-55 3D

Description

The Yak-55 3D ARF dispels the myth that an expensive brushless motor system is needed for electric 3D aerobatic flight. High alpha flight, Parachutes, Blenders and even Walls are among the Yak-55 3D’s capabilities — and it does all of this with an inexpensive yet powerful brushed motor! The ball bearing 280-size motor and 5:1 gearbox are assembled and ready to install into the airframe, and an included “prop saver”, compatible with APC or GWS prop hubs, allows the prop to deflect back at landing.

• The control surfaces are enormous, and servo arm extensions give even more control surface movement.
• The Yak-55 3D ARF gives incredible 3D performance from a low-cost, easy-to-assemble design — and it’s small enough to be flown in a park, on a playground or even in your own backyard!
• Recesses for the radio components are already in place — there’s even a pre-cut channel in the fuselage for the servo lead wires.
• The full flying stablilizer joiner rod bearings are preinstalled in the fuselage.
• A clear battery hatch, fastened with hook & loop material, allows for quick and easy battery pack changes.
• A generous hardware package is included.

With a low parts count and easy final assembly, this exciting aerobat can be flight-ready in just 2-3 hours! The durable foam construction features a high visibility trim scheme that has already been applied.

The Yak-55 3D ARF’s huge control surfaces include a full flying stabilizer for massive 3D power and impressive hovering ability.

The Yak-55 3D ARF comes with a powerful ball bearing 280-size motor and 5:1 gearbox ready to install. The included “prop saver” allows the prop to deflect back at landing, and is compatible with APC or GWS prop hubs.

Specifications:

• Stock Number: GPMA1190
• Wingspan: 33.5 in (850 mm)
• Wing Area: 297 in² (19 dm²)
• Weight: 12-14 oz (330-380 g)
• Wing Loading: 6-7 oz/ft² (17-20 g/dm²)
• Length: 33 in (840 mm)
• Includes: 280-size motor, 5:1 gear drive, prop, prop saver
• Requires: 4-channel radio w/micro receiver & 3 nano servos, 20A brushed electronic speed control, 12” & 6” servo extensions, 3S1200 or 1500mAh LiPo battery, LiPo compatible charger

More Pictures