Hurricane 200 V2 Flybarless Helicopter ARF (FES Combo)

OVERVIEW:

• This is the smallest flybarless 3D micro helicopter produced to date!
• Only a short time needed for completion. (95% factory assembled)
• New CF (1mm) upper mainframe set which is suitable for micro or hi-torque sub-micro servo.
• New CF (1mm) lower mainframe set and bottom plate produce more space for installing and adjusting the GAUI GU-365 FES gyro.
• Equipped with a CNC Universal Battery Plate that provides more options for C.G. adjustment and installation of electronic gear.
• New CNC Aluminum Tail Case and Double Joint Tail Slider provide precision tail control.
• New CNC Tail Pitch Link Set with 4 Bearings.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount
• New CF Fin and Tail.
• New light-weight fiber glass painted canopy.
• High Performance Tail Rotor Blades.
• High Rigidity Landing Gear Brace.
• Extensive Multi-Blade Heads (3Blade~5Blade) and Scale Bodies available.

SPECS:

• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 100mm
• Motor: KV4800 brushless motor (included)
• ESC : 18A ESC (included)
• GAUI GU-365 FES gyro (Flybarless E-Stabilizer System included)
• Flying weight: 265g ~ 285g
• Main rotor blades: 200mm SP Blades (included) or Wooden (option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

NEEDED FOR ASSEMBLY:

• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 hi-torque Sub-micro or Micro servos for CCPM (Recommendation : Speed faster than 0.15sec/60 deg, Torque higher than 1.5kg/cm) HS,45 or HS65 recommended
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger